Huippulaadukas USA.ssa käsintehty puhallinmikrofoni sopraanosaksofonille
käyttäjiä mm Don Braden, Aaron Santee,Dave Liebman, Tim Ries
AMT TA2: Jukka Perkon käyttämä ja suosittelema!
Sopraanossaan Jukka käyttää TA2 mallia Wi5c langattoman järjestelmän kera; AMT:n sopraanomikin ekvalisoinnit toimivat kahden mikin systeemissä todella hienosti.
The AMT TA2 is a low profile double condenser microphone that attaches to the bell with a low mass clip specifically designed soprano saxophone. The microphone provides pure tonal reproduction while being unobtrusive. The TA2 is an excellent choice for soft to moderate music. A Perfect choice for principal artist or soloist.
The microphone attaches to the bell of instrument, the top or over the keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The second microphone is placed in front of the bell of the microphone. Both microphones are are on goosenecks for optimal placement. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.
The TA2 is terminated by a 3.5mm plug which connects to a belt pack preamp. The output is a pre-determined mix ballanced at AMT's state of the art facilty. The engineers choose the balance by the natural sound of the instrument. The included belt pack houses a volume control, contours the setup for the intended instrument, and powers the microphone system appropriatly. A low Z cable and case is included.
Use it with:
Specifications:
| Element | Condenser |
| Polar Pattern | Cardroid |
| Frequency | 50Hz - 18kHz |
| Sensitivity | -65dB+ 4dB |
| Impedance | 150 Ohms* |
| Phantom Power | 12 to 52 vDC*
Self-powered battery |
| Max input SPL | 120 dB |
| Dimension | 3.5" Flex Arm |
| Cable | 6' |
| Weight | Mic only: 36 grams |
Comes with:
- AMT TA2 Double Microphone
- Belt pack Preamp
- 1/4 - XLR Cable
- Hard shell Blo-mold protective case.
Wireless Ability:
The AMT TA2 can be used with most major brand wireless belt pack transmitters and recievers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. When ordering the AMT Interface, be sure to know your wireless make, model, and pin out configuration. Interfaces are made to order.
