Wired, portable in-ear monitor system – our “classic” product!

Hard-wired headphone amp for those musicians whose instrument restrict their freedom of movement (keyboards, drums,
percussions, background vocals).

Two direct balanced XLR inputs (no special cable required, can also be connected asymmetrically)

  • Much better sound than with wireless in ear systems
  • Switch-over from stereo to mono-mix mode
  • 2 x 40mW output power with limiter
  • Control for volume and pan/mix
  • Sturdy and road-worthy design: aluminum casing, belt clip of stainless steel, Neutrik sockets
  • Mains connector (lockable) to connect an external DC mains adaptor (optional extra)
  • Power supply with 9V block battery (not included)
  • Hours of operation with alkaline battery approx. 12h, with rechargeable battery approx. 8h
Specs
Dimensions L x W x H (in mm):  127 x 82 x 30
Weight:  290 g
Input connectors:  2 Neutrik XLR jacks 3-pole, with interlock
Earphone connector:  1/8" (3.5mm) mini connector
Frequency response:  30 Hz - 20 KHz +/- 2 dB
Minimum impedance of earphones:  12 ohms per side
Input impedance:  15kohms
Nom. input level:  0dB - +4dB (limiter at +6dB)
Nom. input level balanced:  0 dBV
Max. input level balanced:  +4 dBV
Limit input level balanced:  from +5 dBV
Max output power at 20 ohms:  40 mW per channel
Max. operating current:  40 mA
Power supply:  9V block alkaline battery or 8.4V rechargeable battery NiMH
DC-input plug:  ext. input power DC 9V (pin +, ring -)
Operating time of battery:  approx. 8h with 270mAh rechargeable battery, approx. 12h with alkaline battery (depends on headphones volume)


 

Kirjoita arvostelu

Ole hyvä kirjaudu sisään tai rekisteröidy arvostellaksesi

Kuulokevahvistin Fischer Amps Hardwired In Ear Belt Pack

  • Valmistaja: Fischer Amps
  • Tuotenumero: FI001100
  • Saatavuus: Toimitusaika n.1 viikko
  • 195.00€

    (Sis ALV)